In the forging process of titanium alloy, the operation of servo electric screw press is an efficient and accurate process method. However, due to the special nature of the servo electric screw press, a series of matters need to be paid attention to when operating to ensure production safety and forging quality.

First of all, the operator needs to be familiar with the basic principle and operation method of the servo electric screw press. A servo electric screw press is a device that drives a screw screw through a motor to make the die with the forging move up and down in the slider and exert pressure on the forging. Operators need to understand the structure, performance and operation process of the equipment in order to correctly adjust parameters and respond to unexpected situations.

During the operation, the operator must always pay attention to the operating status of the equipment to ensure the normal operation of the equipment. If abnormal sound, vibration or oil leakage is found, stop the machine immediately for inspection. At the same time, the operator should keep the equipment clean to avoid dust, debris and oxide damage to the equipment.

In addition, the operator needs to pay attention to physical safety. During the operation, it is necessary to avoid extending hands and first-class parts into dangerous areas, such as mold gaps and sliding mechanisms. When the equipment is running, the operator must not leave the work position to ensure a timely response to unexpected situations.

In addition, before operation, the operator needs to confirm that the mold and forging meet the requirements. The strength, stiffness and accuracy of the die will affect the quality and accuracy of the forging. Therefore, the operator needs to choose the right mold according to the requirements of the forging, and ensure that the mold is installed correctly and fastened reliably.

In the process of operation, the operator needs to reasonably select parameters such as pressure and speed. Too much pressure or too fast speed can lead to equipment failure or forging defects. Therefore, the operator needs to adjust according to the actual situation to ensure that the equipment operates in a safe and stable state.

Finally, the operator needs to follow the relevant safe operating procedures and equipment instructions. When using the servo electric screw pressure machine, should wear the corresponding protective equipment, such as protective glasses, gloves, etc. In the production process, it is necessary to regularly check the operating status of the equipment and the wear of the mold, and deal with the problems in time. At the same time, it is necessary to keep the workplace clean and orderly to avoid safety accidents caused by disorder.

In short, there are more matters to pay attention to in the operation of the servo electric screw press during the forming process of titanium alloy forgings. Only by strictly abiding by the operating procedures, carefully maintaining the equipment and constantly improving the skill level of the operator can we ensure the safety of the production process and the stability of the quality of the forging. At the same time, strengthening equipment management and safety education is also an essential link.