The operation process of 630T forging servo electric screw press is as follows:

Starting stage: Before operating the 630T forging servo electric screw press, it is necessary to make preparations before starting. First of all, check whether the equipment is in normal condition, including the hydraulic system, servo motor, button switch and other components are normal. Ensure equipment is in a safe condition and free of obstructions or hazardous materials. Then, press the device start button, and the 630T forging servo electric screw press starts.

Operation stage: After the 630T forging servo electric screw press starts normally, the operator can adjust the operating state of the equipment through the control button. According to forging requirements, adjust equipment parameters, such as pressure, speed, etc. At the same time, we should pay close attention to the operation of the equipment, and observe whether the hydraulic system, servo motor and other parts are working normally. If the equipment is abnormal, it should be stopped immediately to check and troubleshoot.

Shutdown stage: When the forging work is completed, the operator should stop the machine immediately. First, press the stop button and the device starts to slow down and stop running. Then, turn off the hydraulic system, servo motor and other parts of the power supply to ensure that the equipment is completely shut down.

Maintenance stage: After each use of 630T forging servo electric screw press, routine inspection and maintenance should be carried out. Check whether the parts of the equipment have abnormal wear or damage, and whether the hydraulic system, servo motor and other parts are working normally. If a fault or problem is found, it should be repaired and replaced immediately.

In short, the operation of the 630T forging servo electric screw press needs to follow certain operating processes and specifications to ensure the normal operation and safety of the equipment. At the same time, regular maintenance and maintenance of equipment is also an important measure to ensure its service life and performance.